logo

NEW      ***    mikroCNC now supports ETH-MCI motion controller

PMDC Servo Motor Drives and Accessories

DC SERVO MOTOR DRIVE DCS-5020 Featured

COMING SOON DCS-5020 is a microcontroller based PWM drive for permanent magnet DC (PMDC) motors with supply voltage up to 240 VDC and maximum current up to 50 A. The…

DC SERVO MOTOR DRIVE DCS-3010(-HV)

DCS-3010 is a microcontroller based PWM drive for permanent magnet DC (PMDC) motors with supply voltage up to 115 VDC (optionally up to 180 VDC for DCS-3010-HV drive) and current…

DCS-100-A V.3 SERVO DRIVE WITH ANALOG OUTPUT ±10V Featured

DCS-100-A v.3 is microcontroller based drive with opto-isolated analog output ±10V. It is used to drive third party servo amplifiers. The servo driver DCS-100-A converts the step/dir digital control signals into…

SINGLE-ENDED – DIFFERENTIAL ENCODER INTERFACE SED2 Featured

Single-ended to differential encoder interface SED2 is a line driver that converts the single-ended input signals (A, B and Z) from the incremental encoder into differential (complementary) outputs (A+, A-,…

DIFFERENTIAL – DIFFERENTIAL ENCODER INTERFACE DD1

Differential-differential encoder interface DD1 is used for connection of differential (optionally single-ended) incremental encoder to DC servo drive DCS-3010 or to DC servo drive with analog output DS-100-A. Incremental encoder…

SINGLE-ENDED – DIFFERENTIAL ENCODER INTERFACE SED1

Single-ended – differential encoder interface SED1 uses for connection of single-ended (optionally differential) incremental encoders to DC servo drive DCS-3010 or to DC servo drive with analog output DCS-100-A. Adapter…

ISOLATED USB PROGRAMMING INTERFACE IPI-USB

USB insulated programming interface, IPI-USB is used for connecting DC servo drive DCS-3010(-HV) and DC servo drive with analog output DCS-100-A to PC during the drive parameters tuning. Insulated interface has…

MOTOR BRAKE CIRCUIT MB-2

When motor slows down moving machine mass, the motor will act as a generator. Regenerative currents are rectified by motor drive and the energy returns to the main DC rail.…

DC SERVO MOTOR 120W

DCM50207D-1000 is a permanent magnet DC brushed motor with attached incremental encoder which provides position feedback to the controller. The incremental encoder has differential outputs and resolution of 1000 PPR,…

News

  • April 2024
    NEW PRODUCT!!! Single-ended to differential encoder interface SED2 is a…
  • February 2024
    DCS-100-A v.3 is a redesigned version of the existing servo…
  • July 2023
    USB-MC INT v.3 motion controller - Redesigned version USB-MC-INT v.3…

logo footer

Develop and produce motion controllers, stepper and DC servo motors drives.

Follow us:

Facebook Twitter Youtube

Contact & Ordering

AUDIOMS AUTOMATIKA DOO
Ibarskih rudara str. 3/8, 34000 Kragujevac
Serbia, EUROPE

Web: www.audiohms.com
E-mail: prodaja@audiohms.com

Technical support
E-mail: office@audiohms.com