Motion Controllers and Breakout Boards

ETH-MC High performance CNC motion controller based on Ethernet connection

ETH-MC is a high performance motion controller for CNC machines designed for use with popular Mach3 CNC control software in Windows XP, Vista, 7, 8, 8.1 and 10 operating systems…

ETH-BOX Motion Controller Based on Ethernet Connection

ETH-BOX is a six axis high performance motion controller for CNC machines designed for use with popular Mach3 control software in Windows XP, Vista, 7, 8, 8.1 and 10 operating…

ETH-MCI Ethernet motion controller ^Featured

ETH-MCI is a 6 axis high performance motion controller for CNC machines designed for use with popular Mach3 CNC control software in Windows XP, Vista, 7, 8, 8.1 and 10…

ISO-USB-BOX V.3 ISOLATED MOTION CONTROLLER ^Featured

ISO-USB-BOX V.3 is 6-axis motion controller designed for use with popular Mach3 CNC control software in Windows XP, Vista, 7, 8, 8.1, 10 and 11 operating systems with 32-bit (x86)…

USB-MC-INT V.3 MOTION CONTROLLER ^Featured

USB-MC-INT v.3 is 6-axes motion controller designed for use with the popular Mach3 CNC control software in Windows XP, Vista, 7, 8, 8.1 and 10 operating systems with 32-bit (x86) and…

USB-MC MOTION CONTROLLER

USB-MC is motion controller designed for use with popular Mach3 CNC control software in Windows XP, Vista, 7, 8, 8.1 and 10 operating systems with 32-bit (x86) and 64-bit (x64)…

USB-UIO1 Breakout board for USB-MC motion controller

Breakout board USB-UIO1 v3.3 is designed for use with USB-MC motion controller to enable connection of CNC controlling system which has up to 6 microstep drives MST-107 and/or DC servo drives…

THC Sensor

THC Sensor Ver.3 is a device designed to enable monitoring of plasma torch arc voltage by the Audioms Automatika motion controller in order to realize THC function (Torch Height Control).…

BREAKOUT BOARD IO3-R3

Breakout board IO3-R3 (Revision R3) has digital buffer for STEP/DIR/ENA command signals and as such it is particularly suitable for the connection up to 4 microstep drives MST-107 and/or MST-109…

Relay board RB-4 ^Featured

Relay board RB-4 has 4 SPDT type relays on it. For activating the relays 4 independent TTL level signals are used. Positive logic is used. Input signals are opto-isolated. Relay…

PULSER Programmable motor motion path generator ^Featured

PULSER is a programmable motion path generator/controller and it is intended for managing the execution of simple motion paths by generating STEP/DIR/ENA control signals. It is used together with the…