News

A side-by-side view of the two version of the motion controllers

June 2024

Redesigned product The ISO-USB-BOX V.3 is a redesigned version of the existing 6-axis motion controller. The motion controller has a built-in isolation USB port, which achieves galvanic isolation between the…

April 2024

NEW PRODUCT!!! Single-ended to differential encoder interface SED2 is a line driver that converts the single-ended input signals (A, B and Z) from the incremental encoder into differential (complementary) outputs…

DCS-100-A v.3 servo driver with opto-isolated analog output ±10V

February 2024

DCS-100-A v.3 is a redesigned version of the existing servo driver with analog output. Instead of the RJ45 connector that was used for control and encoder signals, the new version…

July 2023

USB-MC INT v.3 motion controller - Redesigned version USB-MC-INT v.3 is 6-axes motion controller designed for use with the popular Mach3 CNC control software in Windows XP, Vista, 7, 8,…

April 2023

Microstep stepper motor drive MST-109 - NEW PRODUCT Audioms Automatika doo is proud to present its new microstep stepper motor drive MST-109. microstep stepper motor drive MST-109 is designed to…

September 2022

ETH-MCI Ethernet Motion Controller - NEW PRODUCT Audioms Automatika doo is proud to present its new ETH-MCI motion controller. It is a 6 axis high performance motion controller with integrated 32-bit…

August 2022

Relay Board RB-4 - NEW PRODUCT Relay board RB-4 has 4 SPDT type relays on it. For activating the relays 4 independent TTL level signals are used. Positive logic is…

July 2022

USB-MC-INT Motion Controller - NEW PRODUCT USB-MC-INT is 6-axes motion controller designed for use with the popular Mach3 CNC control software in Windows XP, Vista, 7, 8, 8.1 and 10…

December 2021

CNC control software Audioms Automatika is proud to present its new CNC control software, mikroCNC. MikroCNC is a free software designed to interpret G and Mcodes and turn your PC…

April 2021

Redesign of THC Sensor THC Sensor Ver.3 is a device designed to enable monitoring of plasma torch arc voltage by the Audioms Automatika motion controller in order to realize THC…

March 2021

NEW PRODUCT - Isolated USB motion controller ISO-USB-BOX is 6-axis motion controller designed for use with popular Mach3 CNC control software in Windows XP, Vista, 7, 8, 8.1 and 10…

March 2019

New product – ETH-BOX motion controller ETH-BOX is a six axis high performance motion controller for CNC machines. ETH-BOX is based on ETH-MC motion controller and is designed to enable…

February 2019

New product – ETH-MC motion controller After almost two years of development we are able to present our new product to broader audience. ETH-MC is a high performance motion controller…

May 2018.

NEW PRODUCT - THC Sensor THC sensor is a device designed to enable monitoring of plasma torch arc voltage by the USB-MC motion controller in order to realize THC function…

March 2018.

NEW PRODUCT - SM57HS09 Stepper Motor New product in our product line. Now we can offer stepper motor SM57HS09 in NEMA 23 housing and holding torque 1.3 Nm (184 oz-in).